Various Test Ideas for Cable / Cord / Wire / Plug / Socket
Here are variety of tests and equipment for each test to approach quality improvement of cables, cords, wires, plugs and sockets. Please feel free to contact us for more details.
*We, SHINYEI distribute and support technically the equipment of Yasuda Seiki Seisakusho in Japan.
Abrasion / Friction Testing
➡ No.127 CABTYRE CABLE ABRASION TESTER (Reference: JIS C3005)
➡ No.162-EW SLIP TESTER (FOR ENAMELED WIRE)
➡ No.208 LOW-VOLTAGE CABLE ABRASION TESTER FOR AUTOMOBILE (Reference: JIS C3406, JASO, ISO 6722)
➡ No.210 MAGNET WIRE ABRASION TESTER (Reference: NEMA-C9.5, JASO, ISO 6722)
➡ No.215 SCRAPE TESTER (Reference: JIS (C3003), C3216-3, IEC-60851-3, IEC-60851-3, NEMA-C9.5)
➡ No.253 ELECTRIC RECIPROCATING ABRASION TESTER (FOR PLUG PIN) (Reference: JIS C8282-1, IEC-60884-1)
Cold Resistance Testing with Impact Testing
➡ No.121 BRITTLENESS TEMPERATURE TESTER (Max. -148℉ / -100℃) (Reference: JIS C3005, K6261, K6723, K7216, ASTM D746, D2137, ISO 812, 974)
Extension / Stiffness Testing
➡ No.161 SPRING ELONGATION TESTER (Reference: JIS (C3003), C3216-3, IEC-60851-3)
➡ No.163 ENAMELED WIRE STIFFNESS TESTER (Reference: JIS (C3003), C3216-3, IEC-60851-3)
Flammability Testing
➡ No.252-UL-1581 ELECTRIC WIRE FLAMMABILITY TESTER (Reference: UL-1581, ASTM D5025, D5207)
Flex / Bend Testing
➡ No.125 CABTYRE CABLE FLEXING TESTER (Reference: JIS C3005)
➡ No.254 PLUG FLEXING TESTER (Reference: JIS C3662-2, C8306, IEC-60227-2)
➡ No.256 OUTLET PLUG DURABILITY TESTER (Open/Close motion of Plugs and Sockets) (Reference: JIS C8306)
➡ No.257 OPTICAL FIBER CABLE FLEXING TESTER (Reference: JIS C6821, C6851, C6861, IEC-60794)
➡ No.259 OPTICAL FIBER CRUSH TESTER (Reference: JIS C6821, C6851, C6861, IEC-60794)
➡ No.262 ELECTRIC CORD BENDING TESTER (Reference: JIS C3662-2, C3663-2, IEC-60227-2, 60245-2)
Heat Resistance Testing
➡ No.102 GEER TYPE AGING OVEN (Max. 752℉ / 400℃) (Reference: JIS A5756, B7757, C3005, K6257, K6723, K7212, K7368, ASTM D573, D5374, D5423, E145, UL-746B, IEC-60216-4-1, ISO 188, 4577)
Heat Resistance Testing with Measurement of the Deformation Point
➡ No.173-S CUT-THROUGH TESTER (FOR ENAMELED WIRE) (Max. 932℉ / 500℃) (Reference: JIS C3216-6: 2011)
➡ No.185 PARALLEL PLATE PLASTOMETER (Reference: JIS C3005, C3307, K6723, ASTM D621)
Impact Testing
➡ No.124-PTL CABLE IMPACT TESTER (Reference: JIS C3660-1-4, C8282-1, IEC-60811-1-4, 60884-1, JIS C6821, C6851, C6861)
Ozone Testing
➡ No.187 OZONE AGING TESTER (Reference: ISO 1431-1, ISO 1431-3, JIS K 6259-1, JIS K 6259-2, ISO 18941, JEITA CP-3901B)
Scratch Testing
➡ No.553 PENCIL SCRATCH HARDNESS TESTER (Reference: JIS (C3003), C3216-4, D0202, (K5400), K5600-5-4, K5651, K6894, K6902, ASTM D2197, D3363, ISO 15184, IEC-60851-4)
Test Specimen Processing Machine
➡ No.255 COMPOUND GRINDER (for insulating materials) (Reference: UL-1581)
Voltage Endurance Testing with Destruction Testing
➡ No.199 VOLT-ENDURANCE AND DESTRUCTION TESTER (Reference: JIS C2110, (C3003), C3216-5, IEC-60851-5)
➡ No.199-T TWISTING DEVICE (VOLT-ENDURANCE AND DESTRUCTION TEST) (Reference: JIS (C3003), C3216-5, IEC-60851-5)