News

New ISO 7637 Standard Automotive Transient Surge Simulator

Wafer Temperature Measurement with Thermocouples

The ISS-7810 is a simulator that outputs transient surges required by the international standard ISO 7637 for verifying the noise immunity tolerance of automotive electronic devices.

  • Perform testing in compliance with ISO 7637-2 and ISO 7637-3 Standards.
  • Perform various 12V / 24V tests.
  • Mounted on a space-saving vertical rack.
  • A wide variety of options such as coupling clamps and waveform verifi cation is available.
  • The included remote control software allows individual test sequences setting.
  • Highly operable and intuitively user-friendly integrated remote control software.
READ MORE


Important Announcement Regarding Discontinuation of Noiseken Lightning Surge Simulator model LSS-6330A series

Wafer Temperature Measurement with Thermocouples

We regret to inform you that the production of Lightning Surge Simulator model LSS-6330A series has been discontinued.

READ MORE


New Released Salt Spray/CASS Test Chambers Compliant with Latest ISO 9227:2022

Wafer Temperature Measurement with Thermocouples

Salt Spray Test Chambers and CASS Test Chambers are testing instruments that accelerate corrosion of specimens by continuously spraying various salt solutions in a test chamber under a constant temperature.

READ MORE



Is it possible to do IEC 61000-4-3 and ISO 11452-9 radiated tests more easily?

Is it possible to do IEC 61000-4-3 and ISO 11452-9 radiated tests more easily?
READ MORE



Wafer Temperature Measurement with Thermocouples

Wafer Temperature Measurement with Thermocouples

The high-precision silicon wafers with thermocouples made in Japan for the development of semiconductor manufacturing equipment, process condition setting, and temperature distribution measurement is now available.



  • Precision hole drilling on the wafer ensures high-precision thermal contact position.
  • All products come with a test report as a standard specification.
  • A wide variety of 27 types in total (excluding cord and terminal combinations).
    Wafer size: 3 types (5 / 8 / 9 inches)
    Number of thermocouple sensor points: 3 types (1 / 5 / 9 points) 
    Thermocouple insulation (Teflon / Alumina Fiber Sleeve / Quartz Tube)
  • Other custom-made products are also available.

READ MORE


Various Test Ideas for Cable / Cord / Wire / Plug / Socket

Here are variety of tests and equipment for each test to approach quality improvement of cables, cords, wires, plugs and sockets. Please feel free to contact us for more details.

*We, SHINYEI distribute and support technically the equipment of Yasuda Seiki Seisakusho in Japan.


READ MORE


Is EFT/B sufficient to reproduce malfunctions of EUTs?

― Current immunity testing for transient phenomena defined by international standards describes a test method that applies a waveform simulating typical electromagnetic noise that occurs in nature, such as ESD, EFT/B and lightning surge.
― However, in the actual field, we can be affected by various noises beyond those phenomena described in the standard.
― In case of the EFT/B test, it provides only limited power line noise test and sometimes is difficult to reproduce design failures.
― NoiseKen’s INS (Impulse Noise Simulator) provides a unique test method that covers the noise phenomena which cannot be reproduced by the EFT/B test defined by the international standard IEC 61000-4-4.

READ MORE


Tired of Cleaning Melt Flow Indexer?

Cleaning of Melt Flow Index Tester is an important issue for operators ☹

― Each time one sample is tested, the cylinder and die must be cleaned…
― Operators must completely clean the cylinders and dies…
― If not cleaned completely, the test sample left in the cylinder and die leads to inaccurate measurement result…
― Operators’ cleaning skills, time, and manpower are required…


READ MORE


Thin Plate Broadband Antennas have become conforming to ISO 11452-9 Ed.2.0

emiconductors and PCB Testing

NoiseKen broadband sleeve antenna, NKU70M32G (700MHz~3200MHz) and HF broadband sleeve antenna, NKU2460G (2400MHz~6000MHz) have become conforming to ISO 11452-9 Edition 2.0 standard. ISO 11452-9:2021 specifies test methods and procedures for testing electromagnetic immunity of electronic components for passenger cars and commercial vehicles to portable transmitters in close proximity.

READ MORE


Semiconductors and PCB Testing

emiconductors and PCB Testing

Along with technological innovations such as various electronic devices for communication infrastructure, automobiles, space, aviation, medical care, security, renewable energy and even cryptocurrency mining, higher performance and reliability are required to PCB(Printed Circuit Board) with semiconductors more than ever.

Especially, in the automobile industry, in addition to the development of autonomous/self-driving, the development of electric vehicles is progressing toward the ban on gasoline vehicles including hybrid vehicles in 2035 in the EU, and in-vehicle semiconductors are expected to become more complicated and increased. Shinyei can supply a combination of testing equipment and measuring instruments for those performance and resistance evaluation, detecting factors of malfunction / failure frequency / fluctuation, circuit design, quality control of semiconductors including CPUs, GPUs, FPGAs, ASICs, and PCB from both sides of emission and immunity, and will support operators even after delivery.

Here are some of the testing equipment and measuring instruments. Please feel free to contact us for more details.

READ MORE


Choice of Salt Spray Test Chambers and Corrosion Test Chambers by Test Standards

How do you choose a Salt Spray Test Chamber, Corrosion Test Chamber, or CASS Test Chamber that can reliably achieve the test you want to perform? Choice by the test standard is one of an option. The table below classifies general test standards ISO, IEC, ASTM, SAE, JIS, and JASO by industries such as metals, coatings, paints, varnishes, aluminum anodic oxide film, automotive, electronics, and plastics, showing our test chambers that meet those test standards.

READ MORE


Need Technical Support?

An unexpected issue with the Test Equipment / Test Instrument / Measurement System can stop your project. If you need technical support, feel free to contact us with the model / part number, serial number, and details.
Shinyei can help you to diagnose and fix the issue, including advice on preventative maintenance.

Model / part number examples (SUGA Test Instrument) : CAP-90V, CAP-110, CAP-120, CAP-160, CAP-200, CCT-1L, CCT-2L, CCT-3L, CF800, CS-1S, CT-3, CW, CYP-90, CYP-110, CYP-120, CYP-160, CYP-200, CYP-100R, DW-3, DW-4, GT-100, GS-UVS, DT-1F, DT-CF, DT-W, DT-DX, EF-1R. EF-2R, ER-1, FDP, FUV, FL-P, FL-R, FL-45MC, GF-5, GX75, GW-1, HA-TR, HZ-V3, H40, H75, JA400LA, JA400LB, JD-3, KSS-1, LM-20, LMA-20, M6T, MV3000, MVSS-2, MVSS-3, OMS-HN, OMS-LN, OMS-HW, OMS-LW, OMS-P, ON-1, ON-2M, ON-3T, PS-V, PS-J, PWT, RA-1, RA-2, RA-3, RA-Z, NUS-IS03, NUS-ISO3H, SD-1, JD-3, S80, S80HBBR, S80DBBR, S80-X75, S300, SC-P, SC-T, SD-1, SM-T, SS-2, STP-30, STP-90V, STP-110, STP-120, STP-160, STP-200, SX75, SX75-2D, SF75F, SPX, SX120, SX-H2O2, SX-MV-2D, TG100, TG216, TP, U48, U48AU, UGV-6P, UL94, WF-1, WF-2, X75, XT750 , and more.

Packaging Materials Research and Development

Along with the retail ecommerce growth in recent years, especially since 2020 due to the Covid-19, consumption of packaging materials is increasing as well, suggesting on the issues such as packaging material cost reduction, cutting down on excessive packaging while keeping safety of products, shifting to ecological materials to achieve the Sustainable Development Goals(SDGs) by 2030. Shinyei’s Dynamic Compression Tester for Cushioning Materials ACST series with automatic controller and analysis system helps you to evaluate characteristics of the cushioning materials (cardboard boxes, expanded polystyrene, urethane foam etc.), and identify the borderline to keep the products’ safety, by the shock response acceleration and displacement waveform.

READ MORE


Olsen Type Stiffness Tester made in Japan is now available

Olsen Type Stiffness Tester is used to evaluate bending reaction strength of various materials.
We are now available 3 kinds of the Olsen Type Stiffness Tester made in Japan, manufactured by Yasuda Seiki Seisakusho – the heavy load type, digital version of the heavy load type, and the Light load type. For more details please contact us.

 

READ MORE


Electrical Insulation Degradation & Conduction Reliability Evaluation

Do you evaluate products’ electrical insulation degradation and conduction reliability?
The COVID-19 pandemic that is caused by the coronavirus SARS-CoV-2 has accelerated digital transformation of technologies all over the world. For all those who develop, research, manufacture and related to Tech Products such as 5G phones, laptops, tablets, desktops, electric cars, smart home and medical appliances, audio, cameras, drones, earphones, headphones, speakers, monitors, printers, TVs, wearables, fitness and health trackers, AR, VR, SHINYEI suggests the ETAC automatic measurement systems of the Electrical Insulation Degradation Evaluation System SIR13 and the Conduction Reliability Evaluation System MLR23.
For more details please contact us.

 

READ MORE


Mechanical and Physical Property Testing of Materials

To develop and control higher level of quality, safety, increase customer satisfaction, as well as contribute to production cost effectiveness, it is very important to verify and research mechanical and physical property of the materials. Testing and measurement of the characteristics of substances such as plastic, rubber, as well as film, tape, electrical wire and cord, leather vinyl and cloth, paper, pulp, cardboard, textile, fiber, dyeing, paint, pigment, ink, is available with more than 200 varieties of the testing machines to reproduce stretching, compression, bending, abrasion, friction, impact, burst, distortion, pressure, creep, stiffness, tear, hardness, adhesion, strength, thermal property, material processing, voltage breakdown, voltage durability, environment, chemical property, physical property, thickness, stickiness, density, by YASUDA SEIKI SEISAKUSHO.
For more details please contact us.

 

READ MORE


Discontinuation Notice of Compact Thermologger AM-8000 series

Anritsu Meter / Shinyei will discontinue the Compact Thermologger AM-8000 series as of March 31, 2021.
Repair service of the AM-8000 series will be continued by the end of March 2028, and calibration will be still available even after that and no time limit as far as no abnormality with the Thermologger.
As a replacement of the AM-8000, we recommend the AM-9000 series.
The AM-9000 series are improved accuracy, increased memory capacity, faster interval time, longer battery life comparing to the AM-8000 series, and added multi-input function of different thermocouple type E・K・J・T・R. *Model : AM-9200 and AM-9300.
For more details please contact us.

 

READ MORE


Development of Shock Calibration System through joint research with AIST

SHINYEI has developed a Shock calibration system (Fig.1) based on ISO 16063-22 through joint research with the National Institute of Advanced Industrial Science and Technology (AIST).
Furthermore, in shock calibration using this system, we have obtained ISO / IEC 17025 certificate (Fig.2), which guarantees reliability of calibration results according to the international laboratory accreditation standard.

 

READ MORE


Product Discontinuation Notice

Dear Valued Customer,
Noise Laboratory / Shinyei Corp will discontinue the impulse noise simulator INS-4020/4040 as of May 31, 2020 due to ”the Act on Preventing Environmental Pollution of Mercury” that had taken effect in 2017.

The suggested replacements are as follows; For more details, see this notice. ※ or contact us.

Discontinued model Replacement
INS-4020 INS-S220
INS-4040 TBA

Shinyei appreciates and values our business relationship and looks forward to your continued interest in our products. While we regret any inconvenience this announcement may cause, we are eager to supply your future product requirement with our quality product lines.

Please contact us if you have additional questions.

Thank you.

Interview with Terry Clausing: His Thoughts on Anritsu Products

We had an interview with Terry Clausing (Drysdale & Associates) who specializes in temperature measurement. He explains temperature measurement and its importance in Anritsu products.

 

READ MORE


Missouri Science and Technology University professor reviewed ESS-S3011A

Professor David Pommerenke, one of the foremost experts in ESD research, shares his thoughts on the ESS-S3011A ESD simulator made by NoiseKen from the EMC lab in the Missouri Science and Technology University.

 

READ MORE


Low GWP refrigerant R-448A is available!

As the environmental impact of the refrigerant has become increasingly important in the past years, ETAC has launched a very low GWP and R-448A, which has lower GWP than R-449A, is now used for our temperature and humidity chamber. This climate friendly alternation reduces the GWP by 65% compared to R-404A and minimizes the environmental impact.

By 2022, the use of R-404A will be banned gradually in US, and in Europe effective 2020, any units with GWP more than 2500 will be banned. For more details, please contact us.

READ MORE


[ETAC] Dew, Thermal Shock and Temperature and Humidity Chamber.

Looking for another choice for environmental chamber? ETAC chambers come in a variety of sizes and more than 20 options which will meet your needs for sure.
Onsite service by our well-experienced engineers is also available.

READ MORE


Rutgers University professors reviewed DT-202

 

Two distinguished professors at Rutgers University has shared their thoughts on the DT-202 drop tester, made by Shinyei Testing Machinery. The prestigious school has a Packaging Program under their engineering department, where the DT-202 is used for research in packaging design and analysis.

READ MORE


12th December, 2018, Queretaro, Mexico

 

We are delighted to announce the expansion of our practice with the launch of our liaison office in Queretaro, Mexico, located at Blvd. Bernardo Quintana No. 7001, Torre 1, Interior 808.

READ MORE